2
Spectrum Master™ MS2720T Spectrum Analyzer Introduction
Overview
Introduction
Operating convenience is of paramount importance when
equipment is used in the field.
To achieve greater operating convenience several parameters
are tied to related parameters. The input attenuation value
by default is tied to the reference level, reducing the number
of parameters a field technician may have to set. Also the
RBW/VBW ratio and the span/RBW ratio default to values that
meet most user’s needs but can be changed by users to meet
specific needs, further easing the technician’s burden and
reducing the chances of errors.
Measurement flexibility is important for lab use. Resolution
bandwidth and video bandwidth can be independently set
to meet a user’s measurement needs. In addition the input
attenuator value can be set by the user and the preamplifier
can be turned on or off as needed.
For maximum flexibility, sweeping can be set to free run, or to
do a single sweep. In zero span, the sweep can free run, be set
to trigger when a signal meets or exceeds a certain power level
or it can be externally triggered. The span can be set anywhere
from 10 Hz to 9, 13, 20, 32 or 43 GHz in addition to zero span.
Continuous frequency coverage from 9 kHz to 43 GHz with
option 743 gives the wireless professional the performance
you need for the most demanding measurements.
Whether your need is for spectrum monitoring, hidden
signal detection, RF and microwave signal measurements,
microwave backhaul testing or cellular signal measurements,
the Spectrum Master family gives you the tools you need to
make the job easier and more productive. Improved phase
noise and faster sweep speeds earn this instrument a home
on the lab bench for general purpose spectrum analyzer
measurements.
The built-in AM/FM/SSB demodulator simplifies the job of
identifying interfering signals.
Tracking generator options covering 9 kHz to 9, 13 and 20 GHz
are available.
• Broadband preampliers over the whole frequency
range for increased sensitivity of 14 dB
• Four Sweep Modes – Fast, Performance, No FFT and
Burst Detect™
• Resolution Bandwidths from 1 Hz to 10 MHz
• New triggering choices including hysteresis, hold-off,
and delay
• More zero-span capabilities including 10 MHz
RBW & VBW
• Enhanced Spectrum Analyzer touch screen GUI
including a large marker display choice
• Choice of display options for readability – normal,
black and white, night vision, high contrast
• On-screen Interference Mapping as part of the
Interference Analysis option
• LTE Measurements up to 20 MHz Bandwidth
• 30 MHz wide Zero-Span IF Output at 140 MHz for
external demodulation or analysis of virtually any
wideband signal
• Internal Atomic Clock option delivers the ultimate in
handheld frequency accuracy
9 kHz to 43 GHz
MS2720T Option 0743
Broadband Preamplifier from 0 to 43 GHz
Tracking generator in night-vision display mode
(12 Seiten)
(1 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern